VENZO 4 Bicycle Bike Rack Hitch Mount Car Carrier

SKU: VZ-F13-009

View more products from Venzo

$109.00
RRP $199.00
SAVE $90.00 (45%)
Sold Out

Notify Me
When Back In Stock


Free Shipping Australia Wide
Calculate Shipping


Hitch Mount Bike Carrier

VZ-F13-009 is compatible to your 2" hitch car, easy to attach on with fixed stick.

90° Rotatable

The holder can be bent down 90° for easily to fold, and the whole carrier can also be bent down 90° to open your trunk when it attached to the car, super quick and easy to bend it with fixed stick.

Super flexible clamp

Provide holding for those oversized bike frame and perfect protection to your bicycle and car.

 

SPEC:

  • Max Loading: 4 Bikes. Carry Weight Capacity 60 kg
  • Top Tube Compatible: 25mm to 40mm diameter
  • Hitch Compatible: 2’
  • Material: Steel
  • Finish: black epoxy powder coating
  • Full Instruction Included
  • Additional strap included
  • Weight: 10kg = 22lbs
  • Made in Taiwan
  • Lifetime Warranty
  • If you have ladies, Kids or Y shape Frame bike, please use a bike adaptor (NOT included).

 


SKU
VZ-F13-009 @ Stock: 0
A9.5-L1
Barcode # 9504157079250
Brand Venzo
Shipping Weight 10.5000kg
Shipping Width 0.350m
Shipping Height 0.140m
Shipping Length 0.730m
Shipping Cubic 0.035770000m3
Unit Of Measure ea

Cycling Deal provides FREE shipping for orders over $20 (Conditions Apply) and incredibly competitive rates for those with smaller orders too.

From our base in Melbourne, we aim to get your order to your doorstep no matter where you are across Australia in the quickest timeframe possible.

You don't have to take our word for it though - once you've ordered you'll be able to track your order with the courier company bringing your purchase to you!




So far so good

By: on 26 September 2019
I've only used a few times yet but so far so good for the reasonable price paid, have only tried attaching 2 bikes so far. My only frustration so far is that the holes provided on the rack which receive the pin for the tow hitch are too small to accept the standard quick release pin which comes with the vehicle (toyota prado) and the bolt supplied for this purpose with the rack is too short to fix properly either side of the hitch. This means I have to use a long and narrow bolt with washers which is annoying to fix each time the rack is installed / removed. I will most likely drill out the standard holes to accept the normal hitch pin but that will most likely cause the rack to rust out quicker and no doubt void any warranty.
(4)

Good product thank you

12 January 2019
Good product thank you
(5)

Very good rack

18 January 2018
Fits the round square hitch
(5)


Write a product review


  • products NEWSLETTER
  • Subscribe To Our Newsletter and Get The Latest Deal,Straight to Your Inbox!